Coating defects and others details.

Coating defects and others details.

Coating defects and others details. CHECKING-Checking coating defects of paint failure in which many shall cracks appear in the surface of paint. Checking COALESCING-The settling or drying of an emulsion paint as the water evaporates. COHESION-coating defects of attraction of molecules within a coating ( how it holds together). COLORANT-Concentrated …

Read More »

Fiber Glass Lining Materials Details.

Fiber Glass Lining Materials Details.

FGRL Materials Approval All coating/lining materials should be approved from client and single manufacturer.Abrasive material shall meet requirements of client recommendation.Each batch of abrasive shall be offered for client inspection and approval. All coating/lining material such as primer,caulking (putty) & sealant compounds,fiberglass lining material shall be comply with client standard …

Read More »

Relevant code and standards of FBE coating.

Relevant code and standards of FBE coating.

ISO 8501-1 Code and standards of FBE coating,BS EN ISO 8501-1 Surface preparation is the essential first stage treatment of the steel substrates before the application of any coating,and this is generally accepted as being the most important factor affecting the total success of corrosion protection system.The initial steel surface …

Read More »

FBE internal coating of pipes inspections process.

FBE internal coating of pipes inspections process.

Step-07 Flexibility Test FBE internal coating of pipes,Flexibility Test will be done as per API RP 5L7 for PQT to assure the coating has adequate flexibility for bending or reeling. Test 2.5/PD at 5°C Bending test specimen has no cracks considered.Test specimen plates required as per manufacturer and client recommendation,which …

Read More »

Fusion bonded epoxy pipe coating inspection process.

Fusion bonded epoxy pipe coating inspection process.

Step-01 Appearance Fusion bonded epoxy pipe coating surface should be visually inspected for uniform colour,gloss,free from blisters,fish eyes,pin holes and any others coating defects. Step-02 DFT of fusion bonded epoxy pipe coating. FBE powder coating should be applied to the required thickness in a single layer.The DFT of fusion bonded …

Read More »

Fusion bonded epoxy Application.

Fusion bonded epoxy Application.

Step-01 Primer Application Prior to start fusion bonded epoxy application,the primer will be applied on the internal surface using an internal air spray machine.The oven will be preheated and temperature should be maintained in 180°C for at least 20 minutes prior to loading of primed materials. Primer Application Primer thickness …

Read More »