Home / Glass Lining

Glass Lining

Fiber Glass Lining Application.

Fiber Glass Lining Application.

Epoxy Holding Primer Application. Fiber glass lining,primer application should be applied as soon as approval for surface preparation is received.The primer DFT shall be within minimum 15µ and 50µ maximum.The primer application shall be done by airless spray method. The spray gun nozzle shall be of correct size so that …

Read More »

Surface Preparation of Fiber Glass Lining Surface.

Surface Preparation of Fiber Glass Lining Surface.

Surface Preparation of Fiber Glass Lining Surface. Prior to start surface preparation of the tank surface to be lined should be thoroughly cleaned to remove scale,dirt,paint,oil,grease,weld spatters,sharp protrusions,sliver etc.The tank surface should be completely dry and free from any moisture prior to blast cleaning. Proper ventilation shall be made available …

Read More »

PQT For Fiber Glass Lining of Tank.

PQT For Fiber Glass Lining of Tank.

Lining Procedure Qualification Test. Prior to start any work PQT for fiberglass lining procedure should be qualified.The Steel plate size should be 900mm x 900mm x 6mm thickness welded to another vertical plate of size 900mm x 300mm x 6mm.The Surface preparation should be cleaned according to SIS 05 59 …

Read More »

Fiber Glass Lining Materials Details.

Fiber Glass Lining Materials Details.

FGRL Materials Approval All coating/lining materials should be approved from client and single manufacturer.Abrasive material shall meet requirements of client recommendation.Each batch of abrasive shall be offered for client inspection and approval. All coating/lining material such as primer,caulking (putty) & sealant compounds,fiberglass lining material shall be comply with client standard …

Read More »