Home / Coating / Fiber Glass Lining Materials Details.

Fiber Glass Lining Materials Details.

FGRL Materials Approval

All coating/lining materials should be approved from client and single manufacturer.Abrasive material shall meet requirements of client recommendation.Each batch of abrasive shall be offered for client inspection and approval.

All coating/lining material such as primer,caulking (putty) & sealant compounds,fiberglass lining material shall be comply with client standard and proceedure.

All coating/lining materials shall be procured in original manufacturer’s sealed un-opened containers with batch numbers,date of manufacture and expiry date clearly marked with batch certificate.All proposed materials along with data sheet shall be submitted to client for approval through RAM.

Fiber Glass Lining Materials Details.

The storage of all coating/lining material shall be done as per manufacture’s recommendation in a temperature controlled closed room.

FGRL Material Storage

All coating/lining materials shall be maintained in original sealed manufacturer’s containers with batch/code numbers and date of manufacture clearly marked there on.

All coating/lining materials shall be stored in a temperature controlled storage room.Paint manufacturer’s recommendation shall be strictly followed in storage of painting materials.Receiving inspection shall be carried out once materials reached the store.

The storage area shall be secluded and no other materials shall be stored in the same container.The area shall be demarked as ”NO SMOKING”area.Portable fire exitinguishers and other fire protection measures shall be provided at the storage area.

The use of materials which are not as per the client specification or which have deteriorated shall be strictly forbidden and such materials shall be removed from site.Batch certificate/MTC of proposed primers,paints etc.shall be submitted for verification and approval from time to time as required during the progress of the work.All paints brought to site,receiving inspection shall be carried out with third party and clients.

Fiber Glass Lining Materials Details.

Stock of paints,primers and thinners shall be rotated regularly to ensure that only fresh materials are issued for use.Material issue shall be on ”First in first out basis”.Data sheet for blasting abrasive materials proposed to be used shall be submitted for company’s approval prior to commencement of painting activities.Material for blasting shall be offered to inspectors prior start blasting.Required test certificate and material certificate shall be provided.

All lining materials shall be protected from damage,moisture,direct sunlight.Original containers after being used emptied shall not be reused for any other purpose and shall be disposed as per hazardous waste proceedure.

About Jitendra Bhardwaj

Check Also

Surface Preparation of Fiber Glass Lining Surface.

Surface Preparation of Fiber Glass Lining Surface.

Surface Preparation of Fiber Glass Lining Surface. Prior to start surface preparation of the tank …

Leave a Reply

Your email address will not be published. Required fields are marked *